Unsettled Topics in Unmanned Aerial Vehicle Icing
- Indbinding:
- Paperback
- Sideantal:
- 32
- Udgivet:
- 27. april 2020
- Størrelse:
- 279x216x2 mm.
- Vægt:
- 127 g.
- 2-3 uger.
- 16. december 2024
Forlænget returret til d. 31. januar 2025
Normalpris
Abonnementspris
- Rabat på køb af fysiske bøger
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
Beskrivelse af Unsettled Topics in Unmanned Aerial Vehicle Icing
Unmanned aerial vehicles (UAVs) are an emerging technology with a large variety of commercial and military applications. In-flight icing occurs during flight in supercooled clouds or freezing precipitation and is a potential hazard to all aircraft. In-flight icing on UAVs imposes a major limitation on the operational envelope. This report describes the unsettled topics related to UAV icing. First, typical UAV applications and the general hazards of icing are described. Second, an overview of the special technical characteristics of icing on autonomous and unmanned aircraft is given. Third, the operational challenges for flight in icing conditions are discussed. Fourth, technologies for ice protection that mitigate the icing hazard are introduced. Fifth, the tools and methods required to understand UAV icing and to develop aircraft with cold-weather capabilities are presented. Finally, an assessment of the current and future regulations regarding icing on UAVs is provided.
Icing is a key challenge that the UAV industry needs to address in order to unlock the full potential of this emerging technology. UAVs must be capable of safe and reliable operation in a wide range of weather conditions. This report outlines the most important challenges and gives short- and long-term recommendations on how to solve UAV icing issues.
NOTE: SAE EDGE¿ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE¿ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE¿ Research Reports are not intended to resolve the challenges they identify or close any topic to further scrutiny.
Icing is a key challenge that the UAV industry needs to address in order to unlock the full potential of this emerging technology. UAVs must be capable of safe and reliable operation in a wide range of weather conditions. This report outlines the most important challenges and gives short- and long-term recommendations on how to solve UAV icing issues.
NOTE: SAE EDGE¿ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE¿ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE¿ Research Reports are not intended to resolve the challenges they identify or close any topic to further scrutiny.
Brugerbedømmelser af Unsettled Topics in Unmanned Aerial Vehicle Icing
Giv din bedømmelse
For at bedømme denne bog, skal du være logget ind.Andre købte også..
Find lignende bøger
Bogen Unsettled Topics in Unmanned Aerial Vehicle Icing findes i følgende kategorier:
© 2024 Pling BØGER Registered company number: DK43351621