Strategy for spray coating of highly porous and light weighting particles using spouted bed technology
- Indbinding:
- Paperback
- Sideantal:
- 196
- Udgivet:
- 23. februar 2023
- Størrelse:
- 170x11x240 mm.
- Vægt:
- 343 g.
- 2-3 uger.
- 9. december 2024
På lager
Normalpris
Abonnementspris
- Rabat på køb af fysiske bøger
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
Beskrivelse af Strategy for spray coating of highly porous and light weighting particles using spouted bed technology
In this thesis an in-depth experimental study of the spray coating of light weighting and mesoporous organic aerogels was carried out. The main goal of this study was to design a stable core-shell particle system with a uniform coating layer without changing the initial particle structure. Further, the applied coating layer provides many beneficial improvements and additional properties for the aerogel particles, like an enhanced mechanical stability or a protection against moisture during storage.
To design the structured core-shell particles with unaffected porous structure and uniform coating layer, series of experiments was conducted. The coating process with beeswax and ethanol based shellac solutions was performed at two levels using acoustic levitation and spouted bed set ups. At single particle level the basic influences on particle structure were captured. During coating at multiple particle level, which was performed in spouted bed, the results were validated. The optimum coating process parameters were identified. A uniform and stable core-shell particle system was designed. No change of initial porous particle structure was observed.
To design the structured core-shell particles with unaffected porous structure and uniform coating layer, series of experiments was conducted. The coating process with beeswax and ethanol based shellac solutions was performed at two levels using acoustic levitation and spouted bed set ups. At single particle level the basic influences on particle structure were captured. During coating at multiple particle level, which was performed in spouted bed, the results were validated. The optimum coating process parameters were identified. A uniform and stable core-shell particle system was designed. No change of initial porous particle structure was observed.
Brugerbedømmelser af Strategy for spray coating of highly porous and light weighting particles using spouted bed technology
Giv din bedømmelse
For at bedømme denne bog, skal du være logget ind.Andre købte også..
Find lignende bøger
Bogen Strategy for spray coating of highly porous and light weighting particles using spouted bed technology findes i følgende kategorier:
© 2024 Pling BØGER Registered company number: DK43351621