Manganese in Powder Metallurgy Steels
- Indbinding:
- Hardback
- Sideantal:
- 480
- Udgivet:
- 13. juli 2012
- Udgave:
- 2012
- Størrelse:
- 241x162x31 mm.
- Vægt:
- 868 g.
- Ukendt - mangler pt..
Normalpris
Abonnementspris
- Rabat på køb af fysiske bøger
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding
Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.
Beskrivelse af Manganese in Powder Metallurgy Steels
The monograph introduces the data about the mechanical properties of sintered manganese steels published since 1948 up to the present time. The effect of all possible material, alloying and sintering factors on the properties of manganese steels which are in most cases on the level of those alloyed with nickel is discussed. The sintering of the steels was successfully carried out under laboratory and industrial conditions not fulfilling the thermodynamic requirements for the Mn-O system. The reduction - (self cleaning) effect of manganese vapour for the sintering atmosphere formed by sublimation due to manganese high vapour pressure is presented as the only possible mechanisms under which the sintering of manganese-containing steels takes place. It is stated conclusively that sintering under this mechanisms occurs without demanganisation and decarburization of the compacts in the atmosphere with the low dew point contrary to that with a high dew point adversely affecting the sintering and alloying process.
Brugerbedømmelser af Manganese in Powder Metallurgy Steels
Giv din bedømmelse
For at bedømme denne bog, skal du være logget ind.Andre købte også..
Find lignende bøger
Bogen Manganese in Powder Metallurgy Steels findes i følgende kategorier:
© 2024 Pling BØGER Registered company number: DK43351621