De Aller-Bedste Bøger - over 12 mio. danske og engelske bøger
Levering: 1 - 2 hverdage

Installing Monitoring Wells in Soils - Version 1.0

Bag om Installing Monitoring Wells in Soils - Version 1.0

This technical note provides general guidance on how to install and use piezometers and water-table wells to investigate soil water regimes under conditions commonly encountered in Soil Survey and hydropedology studies. Piezometers and water-table wells installed using these procedures act as lined and unlined bore holes, respectively (Soil Survey Division Staff 1993, page 93), usually at depths that desaturate seasonally. Standard guidelines (Sections 3 and 5) are presented for use in soils where hand augering is practical and saturated hydraulic conductivities are moderate or higher. Alternative methods (Section 6) are provided for problem soils where the standard procedures are impractical or problematic. Limitations: Procedures described here are appropriate only to monitor changes in water level and hydraulic head. They are not intended for water quality sampling, water supply, or determination of saturated hydraulic conductivity (Ksat).

Vis mere
  • Sprog:
  • Engelsk
  • ISBN:
  • 9780359573493
  • Indbinding:
  • Paperback
  • Sideantal:
  • 62
  • Udgivet:
  • 6. april 2019
  • 8-11 hverdage.
  • 11. december 2024
Forlænget returret til d. 31. januar 2025

Normalpris

Abonnementspris

- Rabat på køb af fysiske bøger
- 1 valgfrit digitalt ugeblad
- 20 timers lytning og læsning
- Adgang til 70.000+ titler
- Ingen binding

Abonnementet koster 75 kr./md.
Ingen binding og kan opsiges når som helst.

Beskrivelse af Installing Monitoring Wells in Soils - Version 1.0

This technical note provides general guidance on how to install and use piezometers and water-table wells to investigate soil water regimes under conditions commonly encountered in Soil Survey and hydropedology studies. Piezometers and water-table wells installed using these procedures act as lined and unlined bore holes, respectively (Soil Survey Division Staff 1993, page 93), usually at depths that desaturate seasonally. Standard guidelines (Sections 3 and 5) are presented for use in soils where hand augering is practical and saturated hydraulic conductivities are moderate or higher. Alternative methods (Section 6) are provided for problem soils where the standard procedures are impractical or problematic. Limitations: Procedures described here are appropriate only to monitor changes in water level and hydraulic head. They are not intended for water quality sampling, water supply, or determination of saturated hydraulic conductivity (Ksat).

Brugerbedømmelser af Installing Monitoring Wells in Soils - Version 1.0



Find lignende bøger
Bogen Installing Monitoring Wells in Soils - Version 1.0 findes i følgende kategorier: