De Aller-Bedste Bøger - over 12 mio. danske og engelske bøger
Levering: 1 - 2 hverdage

Bøger i Analog Circuits and Signal Processing serien

Filter
Filter
Sorter efterSorter Serie rækkefølge
  • af Ethiopia Enideg Nigussie
    1.101,95 - 1.188,95 kr.

    This book presents design techniques, analysis and implementation of high performance and power efficient, variation tolerant on-chip interconnects. It is for anyone concerned with the design of next generation, high-performance electronics systems.

  • af Boris Murmann & Manar El-Chammas
    1.088,95 - 1.097,95 kr.

    This book describes techniques for time-interleaving a number of analog-to-digital data converters to achieve demanding bandwidth requirements. Also presented is a real-world low-power solution that alleviates time-varying signal artifacts.

  • af Bupesh Pandita
    1.094,95 - 1.103,95 kr.

    Focusing on complex delta-sigma ADCs, this book describes techniques to alleviate problems in implementation, such as image rejection deterioration due to mismatches. It also covers the advantages of filtering STFs and sets out an implementation architecture.

  • af Sao-Jie Chen, Tsung-Yi Ho & Yao-Wen Chang
    1.120,95 kr.

    This book presents a novel multilevel full-chip router, namely mSIGMA for SIGnal-integrity and MAnufacturability optimization. The book includes a detailed description on the modern VLSI routing problems, and multilevel optimization on routing design to solve the chip complexity problem.

  • af Payam Heydari & Aminghasem Safarian
    1.117,95 kr.

    A comprehensive study of silicon-based distributed architectures in wideband circuits are presented in this book. Novel circuit architectures for ultra-wideband (UWB) wireless technologies are described. The book begins with an introduction of several transceiver architectures for UWB.

  • - Circuits, Systems, and Applications
     
    1.104,95 kr.

    This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF) and digital signal processing circuits (DSP). It addresses issues from circuit and system design to production design.

  • af Ramesh Harjani & Taehyoun Oh
    1.088,95 - 1.094,95 kr.

    This book describes design techniques that can be used to mitigate crosstalk in high-speed I/O circuits. It examines the problem of crosstalk and ISI mitigation encountered as data rates have continued beyond 10Gb/s.

  • af Patrick Reynaert & Michiel Steyaert
    1.581,95 kr.

    This book tackles both high efficiency and high linearity power amplifier (PA) design in low-voltage CMOS. With its emphasis on theory, design and implementation, the book offers a guide for those actively involved in the design of fully integrated CMOS wireless transceivers.

  • af Raj Senani, D. R. Bhaskar, A. K. Singh & mfl.
    939,95 kr.

    Coverage includes a comprehensive survey of commercially available, off-the-shelf integrated circuit CFOAs, as well as recent advances made on the design of CFOAs, including design innovations for bipolar and CMOS CFOAs.

  • af Georges Gielen & Elie Maricau
    1.101,95 - 1.268,95 kr.

    This book covers modeling, simulation and analysis of analog circuit aging, nanometer CMOS physical effects resulting in unreliability, transistor aging compact models for circuit simulation, methods for efficient circuit reliability simulation and more.

  • af Manuel Delgado-Restituto & Jens Masuch
    1.197,95 - 1.263,95 kr.

    This book presents concepts and architectures for power use, wireless links, and circuit design for Wireless Body Area Networks, which will allow new applications for the ambulatory health monitoring of chronic disease patients and the elderly population.

  • - RF/Analog Circuit Techniques
    af Ramesh Harjani & Bodhisatwa Sadhu
    1.093,95 - 1.167,95 kr.

    This book covers architecture and circuit design for cognitive radio receiver front-ends, offering a holistic explanation of RF circuits for cognitive radio systems and in-depth exploration of existing and novel circuit design techniques and architectures.

  • af Viranjay M. Srivastava & Ghanshyam Singh
    1.101,95 - 1.364,95 kr.

    This book provides analysis and discusses the design of various MOSFET technologies. Coverage includes comparison of Single-gate MOSFET and Double-gate MOSFET switching parameters as well as testing of MOSFETs parameters using image acquisition.

  • af Baker Mohammad
    1.094,95 - 1.180,95 kr.

    This book describes the various tradeoffs systems designers face when designing embedded memory. It uses real product examples to demonstrate embedded memory design flow from architecture, to circuit design, design for test and yield analysis.

  • - Modeling, Simulation, Analysis and Design
    af Francesco Brandonisio & Michael Peter Kennedy
    1.100,95 - 1.248,95 kr.

    This book offers a novel approach to the analysis and design of all-digital phase-locked loops (ADPLLs), covering time-to-digital converters, noise shaping and more. Includes advice on analysis and simulation techniques, and reusable Matlab code.

  • af Muhammed Bolatkale, Lucien J. Breems & Kofi A. A. Makinwa
    1.097,95 kr.

    Readers will be enabled to implement ADCs as continuous-time delta-sigma (CT ) modulators, offering simple resistive inputs, which do not require the use of power-hungry input buffers, as well as offering inherent anti-aliasing, which simplifies system integration.

  • af Pieter A. J. Nuyts, Patrick Reynaert & Wim Dehaene
    1.948,95 - 2.016,95 kr.

    This book describes the design of fully digital multistandard transmitter front-ends which can directly drive one or more switching power amplifiers, eliminating all other analog components. Describes two chips designed using nanometer CMOS technologies.

  • af Sao-Jie Chen & Yong-Hsiang Hsieh
    1.086,95 kr.

    The 802.11n wireless standard uses 64-state quadrature amplitude modulation (64-QAM) to achieve higher spectral efficiency. Consequently, the transmitter and receiver require a higher signal to noise ratio with the same level of error rate performance.

  • af Toru Tanzawa
    1.189,95 kr.

    Providing detailed design techniques that enable readers to create more efficient switch-capacitor on-chip generators, this guide features comprehensive exemplar circuits and covers all the component circuit blocks including level-shifters and oscillators.

  • af Wim Dehaene & Nele Reynders
    939,95 - 1.354,95 kr.

    This book focuses on increasing the energy-efficiency of electronic devices so that portable applications can have a longer stand-alone time on the same battery. The authors explain the energy-efficiency benefits that ultra-low-voltage circuits provide and provide answers to tackle the challenges which ultra-low-voltage operation poses.

  • af Alyssa Apsel, Xiao Wang & Rajeev Dokania
    1.224,95 - 1.290,95 kr.

    This book explores the design of ultra-low power radios and shows how they can form networks to facilitate a applications in healthcare and environmental monitoring, since they can operate for years off a small battery or harvest energy from the environment.

  • af Wouter A. Serdijn, John R. Long & Aleksandar Tasic
    1.675,95 kr.

    With a billion - soon to be two billion - cellular telephones in circulation, the next challenge is to make cellular radio functions adaptive to their environment. This book provides a comprehensive theoretical framework for optimizing performance, discussing joint optimization of Noise Figure and Input Intercept Point in receiver systems.

  • af Patrick Reynaert & Dixian Zhao
    939,95 - 1.338,95 kr.

    The authors show the recent development of millimeter-wave design techniques, especially of power amplifiers and transmitters, and presents novel design concepts, such as "power transistor layout" and "4-way parallel-series power combiner", that can enhance the output power and efficiency of power amplifiers in a compact silicon area.

  • - Modeling, Verification, Optimization, and Protection
    af Khaled Salah Mohamed
    567,95 - 694,95 kr.

    This book describes the life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection.

  • - Design Methodology for Charge Pumps
    af Toru Tanzawa
    1.511,95 - 1.579,95 kr.

    This new edition includes a variety of useful updates, including coverage of power efficiency and comprehensive optimization methodologies for DC-DC voltage multipliers, modeling of extremely low voltage Dickson charge pumps, and modeling and optimum design of AC-DC switched-capacitor multipliers for energy harvesting and power transfer for RFID.

  • af Michiel Steyaert & Hans Meyvaert
    1.102,95 - 1.227,95 kr.

    AC-DC conversion from the mains to a low voltage DC is discussed, enabling an efficient and compact, lower-power auxiliary power supply to take over the power delivery during the standby mode of mains-connected appliances, allowing the main power converter of these devices to be shut down fully.

  • af Jorge Fernandes & Taimur Rabuske
    1.099,95 - 1.101,95 kr.

    This book introduces readers to the potential of charge-sharing (CS) successive approximation register (SAR) analog-to-digital converters (ADCs), while providing extensive analysis of the factors that limit the performance of the CS topology.

  • - Circuits, Systems, and Applications
     
    1.388,95 kr.

    This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF) and digital signal processing circuits (DSP). It addresses issues from circuit and system design to production design.

  • af Ramesh Harjani & Rakesh Kumar Palani
    1.005,95 - 1.180,95 kr.

    This book describes intuitive analog design approaches using digital inverters, providing filter architectures and circuit techniques enabling high performance analog circuit design.

  • af Mohammed Ismail, Baker Mohammad, Hani Saleh & mfl.
    939,95 - 1.093,95 kr.

    This book presents techniques necessary to predict cardiac arrhythmias, long before they occur, based on minimal ECG data. The authors describe the key information needed for automated ECG signal processing, including ECG signal pre-processing, feature extraction and classification.