Bøger af Joan Horvath

The Make: Math Teacher's Supplement is a guide for teachers, parents and others who are exploring teaching with the authors' Make: Geometry, Make: Trigonometry, or Make: Calculus books. It covers the philosophy behind the books as well as practical tips for managing student 3D printed workflow, classroom technology needed, assessing student understanding, and similar topics. The authors include a list of learning objectives by chapter for all three books, and a matrix of topics covered to simplify adding these materials to existing lesson plans. This guide draws on the the authors' experience training teachers to use 3D printers and OpenSCAD (the math modeling software used in the other books) to summarize what a teacher needs to know before class starts, and tips on learning enough to stay ahead of the students as they explore the 3D printable and other models in the book series. Note that this supplement presumes that the reader has one or more of the author's Make: mathematics books. It is not a "Teacher's Edition" which repeats the content of the regular edition books. Those must be purchased separately.

Create 3D printable models that can help students from kindergarten through grad school learn math, physics, botany, chemistry, engineering and more. This book shows parents and teachers how to use the models inside as starting points for 3D printable explorations. Students can start with these models and vary them for their own explorations. Unlike other sets of models that can just be scaled, these models have the science built-in to allow for more insight into the fundamental concepts.Each of the eight topics is designed to be customized by you to create a wide range of projects suitable for science fairs, extra credit, or classroom demonstrations. Science fair project suggestions and extensive "where to learn more" resources are included, too. You will add another dimension to your textbook understanding of science. For this New Edition: The second edition of 3D Printed Science Projects is a thorough update of the original, modernizing the 3D printing technology. 3D Printed Science Projects shows you how to create 3D printable models that can help students from kindergarten through grad school learn math, physics, botany, chemistry, engineering and more. Each of the models is created in the free, open source CAD program OpenSCAD, so it can be customized by the reader. This allows the models to be the basis of open-ended STEM projects at a variety of levels.What You'll Learn Create (and present the science behind) 3D printed models.Use a 3D printer to create those models as simply as possible.Discover new science insights from designing 3D models. Who This Book Is For3D Printed Science Projects particularly targets the technology-squeamish teacher or parent who want their kids tolearn something from their 3D printer but need help getting started. Kids who love science, homeschoolers (and the grandmas who buy them birthday presents) will be customers.

"Trigonometry has 2000-year-old roots in everyday useful endeavors, like finding the size of an object too big or far away to measure directly, or navigating from Point A to Point B. However, it is often taught very theoretically, with an emphasis on abstractions. Make: Trigonometry uses 3D printable models and readily-available physical objects like wire and cardboard tubes to develop intuition about concepts in trigonometry and basic analytic geometry. Readers will imagine the thought process of the people who invented these mathematical concepts, and can try out 'math experiments' to see for themselves how ingenious ancient navigators and surveyors really were. The analytic geometry part of the book links equations to many of these intuitive concepts, which we explore through in-depth explanations of manipulative models of conic sections. This book is aimed at high school students who might be in Algebra II or Pre-Calculus. It shows the geometrical and practical sides of these topics that otherwise can drown in their own algebra. Make: Trigonometry builds on the basics of the authors' earlier book, Make: Geometry, and is intended as a bridge from that book to their Make: Calculus book. The user can read this book and understand the concepts from the photographs of 3D printable models alone. However, since many models are puzzle-like, we encourage the reader to print the models on any consumer-grade filament based 3D printer. The models are available for download in a freely-available open source repository. They were created in the free program OpenSCAD, and can be 3D printed or modified by the student in OpenSCAD to learn a little coding along the way.

"When Isaac Newton developed calculus in the 1600s, he was trying to tie together math and physics in an intuitive, geometrical way. But over time math and physics teaching became heavily weighted toward algebra, and less toward geometrical problem solving. However, many practicing mathematicians and physicists will get their intuition geometrically first and do the algebra later. Make:Calculus imagines how Newton might have used 3D printed models, construction toys, programming, craft materials, and an Arduino or two to teach calculus concepts in an intuitive way. The book uses as little reliance on algebra as possible while still retaining enough to allow comparison with a traditional curriculum. This book is not a traditional Calculus I textbook. Rather, it will take the reader on a tour of key concepts in calculus that lend themselves to hands-on projects. This book also defines terms and common symbols for them so that self-learners can learn more on their own"

Geometry, of all the branches of mathematics, is the one that is most easily visualized by making something. This book aims to take geometry back to its practical roots with 3D printed models and puzzles as well as demonstrations with household objects like flashlights and paper towel tubes.

Mastering 3D Printing shows you how to get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient.You've printed key chains. You've printed simple toys. Now you're ready to innovate with your 3D printer to start a business or teach and inspire others. Joan Horvath has been an educator, engineer, author, and startup 3D printing company team member. She shows you all of the technical details you need to know to go beyond simple model printing to make your 3D printer work for you as a prototyping device, a teaching tool, or a business machine.

Pull back the curtain on making fun and innovative costumes and accessories incorporating technologies like low-cost microprocessors, sensors and programmable LEDs. Fashion tech can require skills in design, pattern-making, sewing, electronics, and maybe 3D printing. Besides the tech skills, making a good costume or accessory also requires knowledge of the intangibles of what makes a good costume. This book is a collaboration between two technologists and a veteran teacher, costumer, and choreographer. Regardless of whether you are coming at this from the theater costuming, sewing, or electronics side, the authors will help you get started with the other skills you need.More than just a book of projects (although it has those too), Practical Fashion Tech teaches why things are done a certain way to impart the authors' collective wealth of experience. Whether you need a book for a wearable tech class or you just want to get started making fantastic costumes and wearables on your own, Practical Fashion Tech will get you there.What you will learn:The fundamentals of both the sewing and the technology aspects of wearable tech for fashionHow to make a memorable costume that reacts to its wearer or environmentIdeas for using this book as a textbookWho this is for:Electronics enthusiasts, hipsters, costume designers, teachers, and students who want to learn how to make fashion or cosplay wearables. Cosplay fans wanting to incorporate sensors and more into their costumes.

3D Printed Science Project Volume 2 describes eight open-source 3D printable models, as well as creative activities using the resulting 3D printed pieces.

Create 3D printable models that can help students from kindergarten through grad school learn math, physics, botany, chemistry, engineering and more. This book shows parents and teachers how to use the models inside as starting points for 3D printable explorations. Students can start with these models and vary them for their own explorations. Unlike other sets of models that can just be scaled, these models have the science built-in to allow for more insight into the fundamental concepts.Each of the eight topics is designed to be customized by you to create a wide range of projects suitable for science fairs, extra credit, or classroom demonstrations. Science fair project suggestions and extensive "e;where to learn more"e; resources are included, too. You will add another dimension to your textbook understanding of science.What You'll Learn Create (and present the science behind) 3D printed models.Use a 3D printer to create those models as simply as possible.Discover new science insights from designing 3D models. Who This Book Is ForParents and teachers 

In 3D Printing With MatterControl, Joan Horvath and Rich Cameron, the team behind Mastering 3D Printing, explain step-by-step how to use the MatterControl program, which allows you to control many common types of 3D printers (including both cartesian and delta style machines). 3D Printing With MatterControl can stand alone, or it can be a companion to Mastering 3D Printing to show you how to install, configure, and use best practices with your printer and printing software. The book includes both step by step software walkthroughs and case studies with typical 3D printed objects.Whether you are a "e;maker"e; or a teacher of makers, 3D Printing with MatterControl will show you how to get the most out of your printer with the new standard for open source 3D printing software.While there are books available on 3D printers, and even a few on software to make models for printers, there are few good sources covering the software that actually controls these printers. MatterControl is emerging as the leading open source software for 3D printers, and 3D Printing With MatterControl covers this new standard in this brief book.

The New Shop Class connects the worlds of the maker and hacker with that of the scientist and engineer. If you are a parent or educator or a budding maker yourself, and you feel overwhelmed with all of the possible technologies, this book will get you started with clear discussions of what open source technologies like 3D printers, Arduinos, robots and wearable tech can really do in the right hands. Written by real "e;rocket scientist"e; Joan Horvath, author of Mastering 3D Printing, and 3D printing expert Rich Cameron (AKA whosawhatsis), The New Shop Class is a friendly, down-to-earth chat about how hands-on making things can lead to a science career.Get practical suggestions about how to use technologies like 3D printing, Arduino, and simple electronicsLearn how to stay a step ahead of the young makers in your life and how to encourage them in maker activitiesDiscover how engineers and scientists got their start, and how their mindsets mirror that of the maker