Bøger i Wiley-ASME Press Series serien

Fundamentals of Heat Engines Reciprocating and Gas Turbine Internal Combustion Engines Summarizes the analysis and design of today's gas heat engine cycles This book offers readers comprehensive coverage of heat engine cycles. From ideal (theoretical) cycles to practical cycles and real cycles, it gradually increases in degree of complexity so that newcomers can learn and advance at a logical pace, and so instructors can tailor their courses toward each class level. To facilitate the transition from one type of cycle to another, it offers readers additional material covering fundamental engineering science principles in mechanics, fluid mechanics, thermodynamics, and thermochemistry. Fundamentals of Heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines begins with a review of some fundamental principles of engineering science, before covering a wide range of topics on thermochemistry. It next discusses theoretical aspects of the recipro- cating piston engine, starting with simple air-standard cycles, followed by theoretical cycles of forced induction engines, and ending with more realistic cycles that can be used to predict engine performance as a first approximation. Lastly, the book looks at gas turbines and cov- ers cycles with gradually increasing complexity to end with realistic engine design-point and off-design calculations methods. Covers two main heat engines in one single reference Teaches heat engine fundamentals as well as advanced topics Includes comprehensive thermodynamic and thermochemistry data Offers customizable content to suit beginner or advanced undergraduate courses and entry-level postgraduate studies in automotive, mechanical, and aerospace degrees Provides representative problems at the end of most chapters, along with a detailed example of piston-engine design-point calculations Features case studies of design-point calculations of gas turbine engines in two chapters Fundamentals of Heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines can be adopted for mechanical, aerospace, and automotive engineering courses at different levels and will also benefit engineering professionals in those fields and beyond.

A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchangers - Analysis, Design and Optimization using FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data - Finite Volume Analysis Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchangers. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchangers - Analysis, Design and Optimization using FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.

Introduces a revolutionary, quadratic-programming based approach to solving long-standing problems in motion planning and control of redundant manipulatorsThis book describes a novel quadratic programming approach to solving redundancy resolutions problems with redundant manipulators. Known as ``QP-unified motion planning and control of redundant manipulators'' theory, it systematically solves difficult optimization problems of inequality-constrained motion planning and control of redundant manipulators that have plagued robotics engineers and systems designers for more than a quarter century.An example of redundancy resolution could involve a robotic limb with six joints, or degrees of freedom (DOFs), with which to position an object. As only five numbers are required to specify the position and orientation of the object, the robot can move with one remaining DOF through practically infinite poses while performing a specified task. In this case redundancy resolution refers to the process of choosing an optimal pose from among that infinite set. A critical issue in robotic systems control, the redundancy resolution problem has been widely studied for decades, and numerous solutions have been proposed. This book investigates various approaches to motion planning and control of redundant robot manipulators and describes the most successful strategy thus far developed for resolving redundancy resolution problems.* Provides a fully connected, systematic, methodological, consecutive, and easy approach to solving redundancy resolution problems* Describes a new approach to the time-varying Jacobian matrix pseudoinversion, applied to the redundant-manipulator kinematic control* Introduces The QP-based unification of robots' redundancy resolution* Illustrates the effectiveness of the methods presented using a large number of computer simulation results based on PUMA560, PA10, and planar robot manipulators* Provides technical details for all schemes and solvers presented, for readers to adopt and customize them for specific industrial applicationsRobot Manipulator Redundancy Resolution is must-reading for advanced undergraduates and graduate students of robotics, mechatronics, mechanical engineering, tracking control, neural dynamics/neural networks, numerical algorithms, computation and optimization, simulation and modelling, analog, and digital circuits. It is also a valuable working resource for practicing robotics engineers and systems designers and industrial researchers.

A Clear, Comprehensive Introduction to Standards in the Engineering ProfessionsStandards supplement the design process by guiding the designer toward consistency, safety, and reliability. As daily life involves increasingly complex and sophisticated instruments, standards become indispensable engineering tools to ensure user safety and product quality. Primer on Engineering Standards: Expanded Textbook Edition delves into standards creation and compliance to provide students and engineers with a comprehensive reference.The different types of standards are dissected and discussed in terms of development, value, impact, interpretation, and compliance, and options are provided for situations where conformance is not possible. The process of standards creation is emphasized in terms of essential characteristics and common pitfalls to avoid, with detailed guidance on how, where, and with whom one may get involved in official development.Organized for both quick reference and textbook study, this new Expanded Textbook Edition provides a quick, clear understanding of critical concepts, ramifications, and implications as it:* Introduces the concepts, history, and classification of standards, rules, and regulations* Discusses the federal, state, and local government's role in standards development and enforcement* Distinguishes voluntary consensus standards, limited consensus standards, and jurisdictional versus non-jurisdictional government standards* Covers the need for and process of exemptions to existing standards* Examines the characteristics of a good standard, and discusses opportunities for involvement in development* Includes case studies to demonstrate standards applications, and extensive appendices to direct further inquiryThe successful design, fabrication, and operation of any product relies on foundational understanding of pertinent standards; indeed, standards and guidelines form a central pillar of the engineering profession. This helpful resource goes beyond a list of rules to help students and practitioners gain a better understanding of the creation, import, and use of standards.

An Application-Oriented Introduction to Essential Optimization Concepts and Best PracticesOptimization is an inherent human tendency that gained new life after the advent of calculus; now, as the world grows increasingly reliant on complex systems, optimization has become both more important and more challenging than ever before. Engineering Optimization provides a practically-focused introduction to modern engineering optimization best practices, covering fundamental analytical and numerical techniques throughout each stage of the optimization process.Although essential algorithms are explained in detail, the focus lies more in the human function: how to create an appropriate objective function, choose decision variables, identify and incorporate constraints, define convergence, and other critical issues that define the success or failure of an optimization project.Examples, exercises, and homework throughout reinforce the author's "do, not study" approach to learning, underscoring the application-oriented discussion that provides a deep, generic understanding of the optimization process that can be applied to any field.Providing excellent reference for students or professionals, Engineering Optimization:* Describes and develops a variety of algorithms, including gradient based (such as Newton's, and Levenberg-Marquardt), direct search (such as Hooke-Jeeves, Leapfrogging, and Particle Swarm), along with surrogate functions for surface characterization* Provides guidance on optimizer choice by application, and explains how to determine appropriate optimizer parameter values* Details current best practices for critical stages of specifying an optimization procedure, including decision variables, defining constraints, and relationship modeling* Provides access to software and Visual Basic macros for Excel on the companion website, along with solutions to examples presented in the bookClear explanations, explicit equation derivations, and practical examples make this book ideal for use as part of a class or self-study, assuming a basic understanding of statistics, calculus, computer programming, and engineering models. Anyone seeking best practices for "making the best choices" will find value in this introductory resource.

A unique approach to teaching particle and rigid body dynamics using solved illustrative examples and exercises to encourage self-learningThe study of particle and rigid body dynamics is a fundamental part of curricula for students pursuing graduate degrees in areas involving dynamics and control of systems. These include physics, robotics, nonlinear dynamics, aerospace, celestial mechanics and automotive engineering, among others. While the field of particle and rigid body dynamics has not evolved significantly over the past seven decades, neither have approaches to teaching this complex subject. This book fills the void in the academic literature by providing a uniquely stimulating, "flipped classroom" approach to teaching particle and rigid body dynamics which was developed, tested and refined by the author and his colleagues over the course of many years of instruction at both the graduate and undergraduate levels.Complete with numerous solved illustrative examples and exercises to encourage self-learning in a flipped-classroom environment, Dynamics of Particles and Rigid Bodies: A Self-Learning Approach:* Provides detailed, easy-to-understand explanations of concepts and mathematical derivations* Includes numerous flipped-classroom exercises carefully designed to help students comprehend the material covered without actually solving the problem for them* Features an extensive chapter on electromechanical modelling of systems involving particle and rigid body motion* Provides examples from the state-of-the-art research on sensing, actuation, and energy harvesting mechanisms* Offers access to a companion website featuring additional exercises, worked problems, diagrams and a solutions manualIdeal as a textbook for classes in dynamics and controls courses, Dynamics of Particles and Rigid Bodies: A Self-Learning Approach is a godsend for students pursuing advanced engineering degrees who need to master this complex subject. It will also serve as a handy reference for professional engineers across an array of industrial domains.

A groundbreaking guide dedicated exclusively to the MCRT method in radiation heat transfer and applied opticsThe Monte Carlo Ray-Trace Method in Radiation Heat Transfer and Applied Optics offers the most modern and up-to-date approach to radiation heat transfer modelling and performance evaluation of optical instruments. The Monte Carlo ray-trace (MCRT) method is based on the statistically predictable behavior of entities, called rays, which describe the paths followed by energy bundles as they are emitted, reflected, scattered, refracted, diffracted and ultimately absorbed.The author - a noted expert on the subject - covers a wide variety of topics including the mathematics and statistics of ray tracing, the physics of thermal radiation, basic principles of geometrical and physical optics, radiant heat exchange among surfaces and within participating media, and the statistical evaluation of uncertainty of results obtained using the method. The book is a guide to help formulate and solve models that accurately describe the distribution of radiant energy in thermal and optical systems of practical engineering interest. This important guide:* Combines radiation heat transfer and applied optics into a single discipline* Covers the MCRT method, which has emerged as the dominant tool for radiation heat transfer modelling* Helps readers to formulate and solve models that describe the distribution of radiant energy* Features pages of color images and a wealth of line drawingsWritten for faculty and graduate students in mechanical and aerospace engineering and applied optics professionals, The Monte Carlo Ray-Trace Method in Radiation Heat Transfer and Applied Optics is the first book dedicated exclusively to the MCRT method.

A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design.Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author -- a noted expert in the field, with over 40 years of experience -- evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components.Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource* Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors* Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author* Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance* Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors* Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressorsWritten for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.

Comprehensively covers the engineering aspects of corrosion and materials in hydrocarbon productionThis book captures the current understanding of corrosion processes in upstream operations and provides a brief overview of parameters and measures needed for optimum design of facilities. It focuses on internal corrosion occurring in hydrocarbon production environments and the key issues affecting its occurrence, including: the types and morphology of corrosion damage; principal metallic materials deployed; and mitigating measures to optimise its occurrence. The book also highlights important areas of progress and challenges, and looks toward the future of research and development to enable improved and economical design of facilities for oil and a gas production.Written for both those familiar and unfamiliar with the subject--and by two authors with more than 60 years combined industry experience--this book covers everything from Corrosion Resistant Alloys (CRAs) to internal metal loss corrosion threats, corrosion in injection systems to microbiologically influenced corrosion, corrosion risk analysis to corrosion and integrity management, and more, notably:* Comprehensively covers the engineering aspects of corrosion and materials in hydrocarbon production* Written by two, renowned experts in the field* Offers practical guide to those unfamiliar with the subject whilst providing a focused roadmap to addressing the topics in a precise and methodical manner* Covers all aspects of corrosion threat and remedial and mitigation measures in upstream hydrocarbon production applicable to sub-surface, surface, and transportation facilities* Outlines technology challenges that need further research as a pre-cursor to moving the industry forward.Operational and Engineering Aspects of Corrosion and Materials in Hydrocarbon Production is an excellent guide for both practicing materials and corrosion engineers working in hydrocarbons production as well as those entering the area who may not be fully familiar with the subject.

A practical guide to the majority of pumps and compressors used in engineering applicationsPumps and compressors are ubiquitous in industry, used in manufacturing, processing and chemical plant, HVAC installations, aerospace propulsion systems, medical applications, and everywhere else where there is a need to pump liquids, or circulate or compress gasses. This well-illustrated handbook covers the basic function, performance, and applications for the most widely used pump and compressor types available on the market today. It explains how each device operates and includes the governing mathematics needed to calculate device performance such as flow rates and compression. Additionally, real-world issues such as cavitation, and priming are covered.Pumps & Compressors is divided into two sections, each of which offers a notation of variables and an introduction. The Pumps section covers piston pumps, radial turbopumps, axial turbopumps, rotating pumps, hydraulic pumps, and pumps with driving flow. The Compressors section covers piston compressors, rotating compressors, turbo compressors, ejectors, vacuum pumps, and compressors for cooling purposes.* A virtual encyclopedia of all pumps and compressors that describes the mechanics of all devices and the theory, mathematics, and formulas governing their function* Allows the reader to develop the skills needed to confidently select the appropriate pump or compressor type and specification for their applicationsPumps & Compressors is an excellent text for courses on pumps and compressors, as well as a valuable reference for professional engineers and laymen seeking knowledge on the topic.

A comprehensive review of state-of-the-art CCHP modeling, optimization, and operation theory and practice This book was written by an international author team at the forefront of combined cooling, heating, and power (CCHP) systems R&D.

Broad coverage of digital product creation, from design to manufacture and process optimizationThis book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing.Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for* being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles,* utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and* presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory.Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.

A guide to the analysis and design of compliant offshore structures that highlights a new generation of platformsOffshore Compliant Platforms provides an authoritative guideto the analysis and design of compliant offshore structures and puts the focus on a new generation of platforms such as: triceratops, Buoyant Leg Storage and Regasification platforms. Whilst the authors - noted experts on the topic - include basic information on the conceptual development of conventional platforms, the book presents detailed descriptions of the design and development of new deep-water platforms.The book describes the preliminary design of triceratops in ultra-deep waters and presents a detailed analysis of environmental loads that are inherent in offshore locations such as wave, wind and current. The new methodology for the dynamic analysis of triceratops under ice loads, predominantly in ice-covered regions, is also examined with detailed parametric studies. In addition, the book covers the structural geometry and the various methods of analysis for assessing the performance of any other similar offshore platform under the special loads. A discussion of the fatigue analysis and service life prediction is also included. This important book:* Includes the analysis and design of compliant offshore structures with a focus on a new generation of platforms* Examines the preliminary design of triceratops in ultra-deep waters* Covers an analysis of environmental loads that are inherent in offshore locations such as wave, wind and current* Reviews the structural geometry and various methods of analysis for assessing the performance of any other similar offshore platform under special loads* Discusses fatigue analysis and service life predictionWritten for engineers and researchers across engineering including civil, mechanical, structural, offshore, ocean and naval architecture, Offshore Compliant Platforms fills the need for a guide to new offshore platforms that provides an understanding of the behaviour of these structures under different loading conditions.

A guide to bearing dynamic coefficients in rotordynamics that includes various computation methodsBearing Dynamic Coefficients in Rotordynamics delivers an authoritative guide to the fundamentals of bearing and bearing dynamic coefficients containing various computation methods. Three of the most popular and state-of-the-art methods of determining coefficients are discussed in detail. The computation methods covered include an experimental linear method created by the author, and numerical linear and nonlinear methods using the finite element method. The author--a renowned expert on the topic--presents the results and discusses the limitations of the various methods.Accessibly written, the book provides a clear analysis of the fundamental phenomena in rotor dynamics and includes many illustrations from numerical analysis and the results of the experimental research. Filled with practical examples, the book also includes a companion website hosting code used to calculate the dynamic coefficients of journal bearings. This important book:* Covers examples of different computation methods, presents results, and discusses limitations of each* Reviews the fundamentals of bearing and bearing dynamic coefficients* Includes illustrations from the numerical analysis and results of the experimental research* Offers myriad practical examples and a companion websiteWritten for researchers and practitioners working in rotordynamics, Bearing Dynamic Coefficients in Rotordynamics will also earn a place in the libraries of graduate students in mechanical and aerospace engineering who seek a comprehensive treatment of the foundations of this subject.

Metrology and Instrumentation: Practical Applications for Engineering and Manufacturing provides students and professionals with an accessible foundation in the metrology techniques, instruments, and governing standards used in mechanical engineering and manufacturing. The book opens with an overview of metrology units and scale, then moves on to explain topics such as sources of error, calibration systems, uncertainty, and dimensional, mechanical, and thermodynamic measurement systems. A chapter on tolerance stack-ups covers GD&T, ASME Y14.5-2018, and the ISO standard for general tolerances, while a chapter on digital measurements connects metrology to newer, Industry 4.0 applications.

Robust ControlRobust ControlYoula Parameterization ApproachDiscover efficient methods for designing robust control systemsIn Robust Control: Youla Parameterization Approach, accomplished engineers Dr. Farhad Assadian and Kevin R. Mallon deliver an insightful treatment of robust control system design that does not require a theoretical background in controls. The authors connect classical control theory to modern control concepts using the Youla method and offer practical examples from the automotive industry for designing control systems with the Youla method.The book demonstrates that feedback control can be elegantly designed in the frequency domain using the Youla parameterization approach. It offers deep insights into the many practical applications from utilizing this technique in both Single Input Single Output (SISO) and Multiple Input Multiple Output (MIMO) design. Finally, the book provides an estimation technique using Youla parameterization and controller output observer for the first time.Robust Control offers readers:* A thorough introduction to a review of the Laplace Transform, including singularity functions and transfer functions* Comprehensive explorations of the response of linear, time-invariant, and dynamic systems, as well as feedback principles and feedback design for SISO* Practical discussions of norms and feedback systems, feedback design by the optimization of closed-loop norms, and estimation design for SISO using the parameterization approach* In-depth examinations of MIMO control and multivariable transfer function propertiesPerfect for industrial researchers and engineers working with control systems, Robust Control: Youla Parameterization Approach is also an indispensable resource for graduate students in mechanical, aerospace, electrical, and chemical engineering.

Explains the mechanisms governing flow-induced vibrations and helps engineers prevent fatigue and fretting-wear damage at the design stageFatigue or fretting-wear damage in process and plant equipment caused by flow-induced vibration can lead to operational disruptions, lost production, and expensive repairs. Mechanical engineers can help prevent or mitigate these problems during the design phase of high capital cost plants such as nuclear power stations and petroleum refineries by performing thorough flow-induced vibration analysis. Accordingly, it is critical for mechanical engineers to have a firm understanding of the dynamic parameters and the vibration excitation mechanisms that govern flow-induced vibration.Flow-Induced Vibration Handbook for Nuclear and Process Equipment provides the knowledge required to prevent failures due to flow-induced vibration at the design stage. The product of more than 40 years of research and development at the Canadian Nuclear Laboratories, this authoritative reference covers all relevant aspects of flow-induced vibration technology, including vibration failures, flow velocity analysis, vibration excitation mechanisms, fluidelastic instability, periodic wake shedding, acoustic resonance, random turbulence, damping mechanisms, and fretting-wear predictions. Each in-depth chapter contains the latest available lab data, a parametric analysis, design guidelines, sample calculations, and a brief review of modelling and theoretical considerations. Written by a group of leading experts in the field, this comprehensive single-volume resource:* Helps readers understand and apply techniques for preventing fatigue and fretting-wear damage due to flow-induced vibration at the design stage* Covers components including nuclear reactor internals, nuclear fuels, piping systems, and various types of heat exchangers* Features examples of vibration-related failures caused by fatigue or fretting-wear in nuclear and process equipment* Includes a detailed overview of state-of-the-art flow-induced vibration technology with an emphasis on two-phase flow-induced vibrationCovering all relevant aspects of flow-induced vibration technology, Flow-Induced Vibration Handbook for Nuclear and Process Equipment is required reading for professional mechanical engineers and researchers working in the nuclear, petrochemical, aerospace, and process industries, as well as graduate students in mechanical engineering courses on flow-induced vibration.

Since mathematical models express our understanding of how nature behaves, we use them to validate our understanding of the fundamentals about systems (which could be processes, equipment, procedures, devices, or products). Also, when validated, the model is useful for engineering applications related to diagnosis, design, and optimization.

The authoritative introduction to all aspects of plastics engineering -- offering both academic and industry perspectives in one complete volume.Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use -- concepts, mechanics, materials, part design, part fabrication, and assembly -- required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together.Divided into five parts -- Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems -- this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics.* Examines every facet of plastics engineering from materials and fabrication methods to advanced composites* Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them* Offers a practical guide to large number of materials and their applications* Addresses current issues for mechanical design, part performance, and part fabricationIntroduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Covers a wide range of practical fluid mechanics, heat transfer, and mass transfer problemsThis book covers the many issues that occur in practical fluid mechanics, heat transfer, and mass transfer, and examines the basic laws (the conservation of matter, conservation of momentum, conservation of energy, and the second law of thermodynamics) of these areas. It offers problem solutions that start with simplifying engineering assumptions and then identifies the governing equations and dependent and independent variables. When solutions to basic equations are not possible, the book utilizes historical experimental studies. It also looks at determining appropriate thermo-physical properties of the fluid under investigation, and covers solutions to governing equations with experimental studies.Case Studies in Fluid Mechanics with Sensitivities to Governing Variables offers chapters on: draining fluid from a tank; vertical rise of a weather balloon; wind drag forces on people; Venturi meter; fluid's surface shape in a rotating cylindrical tank; range of an aircraft; designing a water clock; water turbine under a dam; centrifugal separation of particles; ideal gas flow in nozzles and diffusers; water supply from a lake to a factory; convection mass transfer through air-water interface; heating a room by natural convection; condensation on the surface of a vertical plate in laminar flow regime; bubble rise in a glass of beer; and more.* Covers a broad spectrum of problems in practical fluid mechanics, heat transfer, and mass transfer* Examines the basic laws of fluid mechanics, heat transfer and mass transfer* Presents solutions to governing equations with experimental studiesCase Studies in Fluid Mechanics with Sensitivities to Governing Variables will appeal to engineers working in thermo-physical sciences and graduate students in mechanical engineering.

A thorough guide to the fundamental development of linear piezoelectricity for vibrationsVibrations of Linear Piezostructures is an introductory text that offers a concise examination of the general theory of vibrations of linear piezostructures. This important book brings together in one comprehensive volume the most current information on the theory for modeling and analysis of piezostructures. The authors explore the fundamental principles of piezostructures, review the relevant mathematics, continuum mechanics and elasticity, and continuum electrodynamics as they are applied to electromechanical piezostructures, and include the work that pertains to linear constitutive laws of piezoelectricity.The book addresses modeling of linear piezostructures via Newton's approach and Variational Methods. In addition, the authors explore the weak and strong forms of the equations of motion, Galerkin approximation methods for the weak form, Fourier or modal methods, and finite element methods. This important book:* Covers the fundamental developments to vibrational theory for linear piezostructures* Provides an introduction to continuum mechanics, elasticity, electrodynamics, variational calculus, and applied mathematics* Offers in-depth coverage of Newton's formulation of the equations of motion of vibrations of piezo-structures* Discusses the variational methods for generation of equations of motion of piezo-structuresWritten for students, professionals, and researchers in the field, Vibrations of Linear Piezostructures is an up-to-date volume to the fundamental development of linear piezoelectricity for vibrations from initial development to fully modeled systems using various methods.

Provides comprehensive coverage of theory and hands-on implementation of computer vision-based sensors for structural health monitoringThis book is the first to fill the gap between scientific research of computer vision and its practical applications for structural health monitoring (SHM). It provides a complete, state-of-the-art review of the collective experience that the SHM community has gained in recent years. It also extensively explores the potentials of the vision sensor as a fast and cost-effective tool for solving SHM problems based on both time and frequency domain analytics, broadening the application of emerging computer vision sensor technology in not only scientific research but also engineering practice.Computer Vision for Structural Dynamics and Health Monitoring presents fundamental knowledge, important issues, and practical techniques critical to successful development of vision-based sensors in detail, including robustness of template matching techniques for tracking targets; coordinate conversion methods for determining calibration factors to convert image pixel displacements to physical displacements; sensing by tracking artificial targets vs. natural targets; measurements in real time vs. by post-processing; and field measurement error sources and mitigation methods. The book also features a wide range of tests conducted in both controlled laboratory and complex field environments in order to evaluate the sensor accuracy and demonstrate the unique features and merits of computer vision-based structural displacement measurement.* Offers comprehensive understanding of the principles and applications of computer vision for structural dynamics and health monitoring* Helps broaden the application of the emerging computer vision sensor technology from scientific research to engineering practice such as field condition assessment of civil engineering structures and infrastructure systems* Includes a wide range of laboratory and field testing examples, as well as practical techniques for field application* Provides MATLAB code for most of the issues discussed including that of image processing, structural dynamics, and SHM applicationsComputer Vision for Structural Dynamics and Health Monitoring is ideal for graduate students, researchers, and practicing engineers who are interested in learning about this emerging sensor technology and advancing their applications in SHM and other engineering problems. It will also benefit those in civil and aerospace engineering, energy, and computer science.

A unique approach to the study of geothermal energy systems This book takes a unique, holistic approach to the interdisciplinary study of geothermal energy systems, combining low, medium, and high temperature applications into a logical order.

Despite significant developments and widespread theoretical and practical interest in the area of Solid-Propellant Nonsteady Combustion for the last fifty years, a comprehensive and authoritative text on the subject has not been available. Theory of Solid-Propellant Nonsteady Combustion fills this gap by summarizing theoretical approaches to the problem within the framework of the Zeldovich-Novozhilov (ZN-) theory. This book contains equations governing unsteady combustion and applies them systematically to a wide range of problems of practical interest. Theory conclusions are validated, as much as possible, against available experimental data. Theory of Solid-Propellant Nonsteady Combustion provides an accurate up-to-date account and perspectives on the subject and is also accompanied by a website hosting solutions to problems in the book.

The first book to comprehensively address the theory, kinematic modelling, numerical simulation and applications of vibration assisted machiningVibration Assisted Machining: Theory, Modelling and Applications covers all key aspects of vibration assisted machining, including cutting kinematics and dynamics, the effect of workpiece materials and wear of cutting tools. It also addresses practical applications for these techniques. Case studies provide detailed guidance on the design, modeling and testing of VAM systems. Experimental machining methods are also included, alongside considerations of state-of-the-art research developments on cutting force modeling and surface texture generation.Advances in computational modelling, surface metrology and manufacturing science over the past few decades have led to tremendous benefits for industry. This is the first comprehensive book dedicated to design, modelling, simulation and integration of vibration assisted machining system and processes, enabling wider industrial application of the technology. This book enables engineering students and professionals in manufacturing to understand and implement the latest vibration assisted machining techniques. Highlights include:* Comprehensive coverage of the theory, kinematics modelling, numerical simulation and applications of vibration assisted machining (VAM)* Case studies with detailed guidance on design, modelling and testing of VAM systems, as well as experimental machining methods* Discussion of state-of-the-art research developments on cutting force modelling and surface texture generation* Coverage of the history of VAM, its current applications and future directions for the technologyVibration Assisted Machining: Theory, Modelling and Applications provides engineering students, researchers, manufacturing engineers, production supervisors, tooling engineers, planning and application engineers and machine tool designers with the fundamentals of vibration assisted machining, along with methodologies for developing and implementing the technology to solve practical industry problems.

A guide to two-phase heat transfer theory, practice, and applicationsDesigned primarily as a practical resource for design and development engineers, Two-Phase Heat Transfer contains the theories and methods of two-phase heat transfer that are solution oriented. Written in a clear and concise manner, the book includes information on physical phenomena, experimental data, theoretical solutions, and empirical correlations. A very wide range of real-world applications and formulas/correlations for them are presented.The two-phase heat transfer systems covered in the book include boiling, condensation, gas-liquid mixtures, and gas-solid mixtures. The author?a noted expert in this field?also reviews the numerous applications of two-phase heat transfer such as heat exchangers in refrigeration and air conditioning, conventional and nuclear power generation, solar power plants, aeronautics, chemical processes, petroleum industry, and more. Special attention is given to heat exchangers using mini-channels which are being increasingly used in a variety of applications. This important book:* Offers a practical guide to two-phase heat transfer* Includes clear guidance for design professionals by identifying the best available predictive techniques* Reviews the extensive literature on heat transfer in two-phase systems* Presents information to aid in the design and analysis of heat exchangers.Written for students and research, design, and development engineers, Two-Phase Heat Transfer is a comprehensive volume that covers the theory, methods, and applications of two-phase heat transfer.

Introduction to Dynamics and Control in Mechanical Engineering Systems is an introductory textbook covering dynamics and controls of engineering systems, with particular focus on mechanical engineering systems. It is ordered pedagogically in lecture note format and provides systematic and concise presentation of dynamics and control.

Companion Animal Care and Welfare: The UFAW Companion Animal Handbook presents a comprehensive, accessible and practical reference for all parties seeking information about the proper care of companion animals.* Identifies the needs of companion animals, explains how we know these needs, and gives scientifically-backed advice on how to meet these needs* Promotes the most humane treatment and best possible care of our companion animals* Addresses controversial issues such as selective breeding, companion animal showing, the keeping of exotic species, and the international pet trade* Covers the husbandry and care of all major companion animal species, including mammals, birds, fish, reptiles and amphibians