Bøger i Lecture Notes in Mechanical Engineering serien

and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology.

Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering.

This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16ΓÇô17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas ΓÇô advanced materials and sustainable energy ΓÇô and a diverse range of subtopics:Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials.Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

This book gathers original findings, both theoretical and experimental, related to various cutting-edge topics in the design and modeling of mechatronic systems, including multiphysics problems.

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on "Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)". The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

This book presents the select proceedings of the International Conference on Functional Material, Manufacturing and Performances (ICFMMP) 2019.

This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1-4 June 2020.

This book contains selected papers from the First International Conference on Progress in Digital and Physical Manufacturing (ProDPM'19), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL).

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on ¿Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)¿. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

This book presents the proceedings from the 5th NEWTECH conference (Belgrade, Serbia, 5-9 June 2017), the latest in a series of high-level conferences that bring together experts from academia and industry in order to exchange knowledge, ideas, experiences, research results, and information in the field of manufacturing.

This book gathers the proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issues (IMEKO TC 14 2019), held in Belgrade, Serbia, on 4-7 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of measurement of geometrical quantities. The book addresses a wide range of topics, including: 3D measurement of GPS characteristics, measurement of gears and threads, measurement of roughness, micro- and nano-metrology, laser metrology for precision measurements, cyber physical metrology, optical measurement techniques, industrial computed tomography, multisensor techniques, intelligent measurement systems, evaluating measurement uncertainty, dimensional management in industry, product quality assurance methods, and big data analytics. By providing updates on key issues and highlighting recent advances in measurement and quality control, the book supports the transfer of vital knowledge to the next generation of academics and practitioners.

These proceedings gather a selection of peer-reviewed papers presented at the 7th International Conference on Fracture Fatigue and Wear (FFW 2018), held at Ghent University, Belgium on 9-10 July 2018.The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology and wear of materials. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership.

This volume contains select papers presented during the 2nd National Conference on Multidisciplinary Analysis and Optimization. The variety of topics and diversity of insights presented in the general field of optimization and its use in design for different applications will be of interest to researchers in academia or industry.

This book offers a collection of original peer-reviewed contributions presented at the 3rd International and 18th National Conference on Machines and Mechanisms (iNaCoMM), organized by Division of Remote Handling & Robotics, Bhabha Atomic Research Centre, Mumbai, India, from December 13th to 15th, 2017 (iNaCoMM 2017). It reports on various theoretical and practical features of machines, mechanisms and robotics; the contributions include carefully selected, novel ideas on and approaches to design, analysis, prototype development, assessment and surveys. Applications in machine and mechanism engineering, serial and parallel manipulators, power reactor engineering, autonomous vehicles, engineering in medicine, image-based data analytics, compliant mechanisms, and safety mechanisms are covered. Further papers provide in-depth analyses of data preparation, isolation and brain segmentation for focused visualization and robot-based neurosurgery, new approaches to parallel mechanism-based Master-Slave manipulators, solutions to forward kinematic problems, and surveys and optimizations based on historical and contemporary compliant mechanism-based design. The spectrum of contributions on theory and practice reveals central trends and newer branches of research in connection with these topics.

This book highlights selected papers from the Mechanical Engineering track, with a focus on mechatronics and manufacturing, presented at the "Malaysian Technical Universities Conference on Engineering and Technology" (MUCET 2019).

This book reports on cutting-edge research in the broad fields of mechanical engineering and mechanics.

This book presents the most significant contributions to the DINAME 2017 conference, covering a range of dynamic problems to provide insights into recent trends and advances in a broad variety of fields seldom found in other proceedings volumes.DINAME has been held every two years since 1986 and is internationally recognized as a central forum for discussing scientific achievements related to dynamic problems in mechanics. Unlike many other conferences, it employs a single-session format for the oral presentations of all papers, which limits the number of accepted papers to roughly 100 and makes the evaluation process extremely rigorous.The papers gathered here will be of interest to all researchers, graduate students and engineering professionals working in the fields of mechanical and mechatronics engineering and related areas around the globe.

This book gathers selected papers presented at the 1st International Conference on Industrial Applications of Adhesives 2020 (IAA 2020). Providing a review of the state-of the art in industrial applications of adhesives, the book serves as a valuable reference resource for researchers and graduate students interested in adhesive bonding.

This book includes the best papers from two conferences on machining and abrasive machining, organized in Poland on September 11-12, 2019. They cover new technologies, such as water jet machining, discuss important topics such as energy efficiency in machining, and analyze different cutting methods, materials and mechanisms.

It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design;

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership.

This book presents the proceedings of the first vehicle engineering and vehicle industry conference. It captures the outcome of theoretical and practical studies as well as the future development trends in a wide field of automotive research. The themes of the conference include design, manufacturing, economic and educational topics.

This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design;

Theseproceedings primarily focus on advances in the theory, experiments, andnumerical simulations of turbulence in the contexts of flow-induced vibrationand noise, as well as their control. Fluid-related structural vibration andnoise problems are often encountered in many engineering fields, increasinglymaking them a cause for concern. The FSSIC conference, held on 5-9 July 2015 inPerth, featured prominent keynote speakers such as John Kim, Nigel Peake, SongFu and Colin Hansen, as well as talks on a broad range of topics: turbulence,fluid-structure interaction, fluid-related noise and the control/managementaspects of these research areas, many of which are clearly interdisciplinary innature. It provided a forum for academics, scientists and engineers working inall branches of Fluid-Structure-Sound Interactions and Control (FSSIC) toexchange and share the latest developments, ideas and advances, bringing themtogether researchers from East and West to push forward the frontiers of FSSIC,ensuring that the proceedings will be of interest to a broad engineeringcommunity.

The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India.

Engineering asset management encompasses all types of engineered assets including built environment, infrastructure, plant, equipment, hardware systems and components.

This proceeding represents state-of-the-art trends and developments in the emerging field of engineering asset management as presented at the Eight World Congress on Engineering Asset Management (WCEAM).

This book has been created on the basis of contributions to the 54th International Conference of Machine Design Departments that was held for the 60th anniversary of Technical University of Liberec.

Its main objective is to highlight the strong interactions between theory and applications of cyclostationary signals with the use of modern statistical tools.An important application of cyclostationary signals is the analysis of mechanical signals generated by a vibrating mechanism.